HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

l When scripting with this command, it will return one of three
positive numbers: 0 (no access granted), 1 (monitor access
granted), or 2 (full access granted).
3. Identify the machine you just logged into as the target by using the target
command.
Command
TARGET
Description
Identifies a machine as the active target machine
Syntax
TARget <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address
Examples
l target beta
l tar beta
Notes
l You must be logged into a machine using the login command
before using the target command.
l Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
4. Specify your active monitor by using the monitor get command.
Command
MONITOR GET
Description
Identifies a machine as the active monitor machine