HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Failing back
1. If you are performing failback before restoring, verify that your source machine is
not connected to the network and that the issue(s) that caused the failure is
resolved. If you have already performed a restoration, your source should already
be connected to the network using a unique identity.
2. Login to the target machine that is currently standing in for the failed source by
using the login command.
Command
LOGIN
Description
Log on to a Storage Mirroring Recover machine
Syntax
LOGIN <machine> <username> <password> [domain]
Options
l machine—Name of the machine
l username—Name of the user. The username is limited to 100
characters.
l password—Password associated with the user name. The
password is limited to 100 characters.
l domain—If logging in using a domain account, this is the domain
name. If logging in using a local account, this is the machine
name. The domain is limited to 100 characters.
Examples
login alpha administrator ******
Notes
l Options that contain non-alphanumeric characters must be
enclosed in quotation marks.
l The password cannot be a Storage Mirroring Recover keyword.
These are any DTCL command (source, target, and so on.) or any
DTCL shortcut command (env, mon, rep, and so on).