HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)
Deleting failover monitoring configuration
1. Specify your active monitor by using the monitor get command.
Command
MONITOR GET
Description
Identifies a machine as the active monitor machine
Syntax
MONitor GET <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address
Examples
l monitor get beta
l mon get beta
Notes
Monitor names that contain non-alphanumeric characters must be
enclosed in quotation marks.
2. To delete the monitor, use the monitor delete command.
Command
MONITOR DELETE
Description
Deletes the specified failover monitor and all of its parameters
Syntax
MONitor DELete <monitor>
Options
monitor—Name of the source machine designated as the monitor