HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Stopping failover monitoring
1. Specify your active monitor by using the monitor get command.
Command
MONITOR GET
Description
Identifies a machine as the active monitor machine
Syntax
MONitor GET <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address
Examples
l monitor get beta
l mon get beta
Notes
Monitor names that contain non-alphanumeric characters must be
enclosed in quotation marks.
2. To stop failover monitoring, use the monitor stop command.
Command
MONITOR STOP
Description
Stops monitoring the source machine for failure
Syntax
MONitor STOP <monitor> [ON <target>]