HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Editing failover monitoring configuration
1. Specify your active monitor by using the monitor get command.
Command
MONITOR GET
Description
Identifies a machine as the active monitor machine
Syntax
MONitor GET <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address
Examples
l monitor get beta
l mon get beta
Notes
Monitor names that contain non-alphanumeric characters must be
enclosed in quotation marks.
2. Review the current failover settings by using the monitor display command.
Command
MONITOR DISPLAY
Description
Displays the monitoring and failover configuration settings for the
specified monitor machine
Syntax
MONitor DISPlay <monitor>
Options
monitor—Name of the source machine designated as the monitor