HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

selected.
l Depending on your sequence of commands, you may need to use
the monitor get command to specify an active monitor before
using monitor display.
l Monitor names that contain non-alphanumeric characters must be
enclosed in quotation marks.
12. Start failover monitoring by using the monitor start command.
Command
MONITOR START
Description
Initiates failover monitoring
Syntax
MONitor START <monitor> [ON <target>]
Options
l monitor—Name of the source machine designated as the
monitor
l target—Name of the target, an IP address on the target, or a
virtual IP address
Examples
l monitor—Name of the source machine designated as the
monitor
l target—Name of the target, an IP address on the target, or a
virtual IP address
Notes
Option names that contain non-alphanumeric characters must be
enclosed in quotation marks.