HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Notes
l If you do not specify a monitor, the current source designated as
the monitor will be used. If you have not identified a monitor, you
will receive an error message stating that a monitor has not been
selected.
l If you choose to use the service option, your source and target
must be using the same Storage Mirroring Recover port settings.
If you choose to use the network option, the port settings can be
different.
l Monitor names that contain non-alphanumeric characters must be
enclosed in quotation marks.
6. To remove an IP address from an established monitor, use the monitor remove
command.
Command
MONITOR REMOVE
Description
Removes an IP address that is currently being monitored
Syntax
MONitor REMove <IP_address> [monitor]
Options
l IP_address—The currently monitored IP address that should be
removed
l monitor—Name of the source machine designated as the
monitor
Examples
l monitor remove 205.31.2.57 alpha
l mon rem 205.31.2.68
Notes
l If you do not specify a monitor, the current source designated as
the monitor will be used. If you have not identified a monitor, you
will receive an error message stating that a monitor has not been
selected.