HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96022, November 2010)

Configuring failover monitoring
1. Specify a target machine by using the target command.
Command
TARGET
Description
Identifies a machine as the active target machine
Syntax
TARget <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address
Examples
l target beta
l tar beta
Notes
l You must be logged into a machine using the login command
before using the target command.
l Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
2. Determine what NICs are available on the specified target by using the niclist
command.
Command
NICLIST
Description
Displays the NICs available on the specified target machine. Each
NIC is assigned an integer value and this value is used in the
monitor move command.