HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

95 of 332
Configuring failover monitoring
1. Specify a target machine by using the target command.
Command TARGET
Description Identifies a machine as the active target machine
Syntax TARget <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address
Examples
● target beta
● tar beta
Notes
● You must be logged into a machine using the login command
before using the target command.
● Target names that contain non-alphanumeric characters must
be enclosed in quotation marks.
2. Determine what NICs are available on the specified target by using the niclist
command.
Command NICLIST
Description
Displays the NICs available on the specified target machine. Each
NIC is assigned an integer value and this value is used in the
monitor move command.
Syntax NICLIST [target]
Options
target—Name of the target, an IP address on the target, or a virtual
IP address
Examples niclist beta
Notes
● If you do not specify a machine name, the value from the
current target will be returned. If you have not identified a
target, no data will be returned.
● If you have not logged into the target machine, no data will be
displayed.
● Target names that contain non-alphanumeric characters must
be enclosed in quotation marks.