HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

67 of 332
Notes
Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
Command SCHEDULE DISABLE
Description
Disables the transmission schedule without clearing the schedule
data
Syntax SCHEDule <target> DISABLE
Options
target—Name of the target, an IP address on the target, or a virtual
IP address Depending on the network route Storage Mirroring
Recover uses to access the target, you may need to specify the
fully qualified domain name.
Examples
● schedule beta disable
● sched beta disable
Notes
Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
3. You can specify a start time, a repeat interval, and queue usage criteria using the
schedule start command.
Command SCHEDULE START
Description
Sets criteria to start the transmission of data from the source to the
target
Syntax
SCHEDule <target> START [STARTTIME = <mm/dd/yy>
<hh:mm>] [MEMLIMIT = <percent>] [QUEUESIZE = <bytes>]
[EVERY <number> <time_units>]
Options
● target—Name of the target, an IP address on the target, or a
virtual IP address Depending on the network route Storage
Mirroring Recover uses to access the target, you may need to
specify the fully qualified domain name.
● mm/dd/yy—Date in month/day/year format indicating when
the transmission will begin
● hh:mm—Time in hour:minute format using the 24-hour clock
indicating when the transmission will begin
● percent—Any number between 0 and 100 indicating the
percentage of system memory that must be in use to initiate
the transmission process