HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

66 of 332

Scheduling data transmission

You can clear an existing schedule, disable or enable the use of a schedule, and set

start, stop, and window criteria.

1. To clear all existing transmission options, use the schedule clear command.

Note:

All transmission options are stored on the source machine until they are

either cleared or the option is updated. At this time, there is not a

command to display the existing transmission options.

Command SCHEDULE CLEAR

Description Clears the existing transmission schedule for the specified target

Syntax SCHEDule <target> CLEAR

Options

target—Name of the target, an IP address on the target, or a virtual

IP address Depending on the network route Storage Mirroring

Recover uses to access the target, you may need to specify the

fully qualified domain name.

Examples

● schedule beta clear

● sched beta clear

Notes

Target names that contain non-alphanumeric characters must be

enclosed in quotation marks.

2. Enable transmission limiting when you want to apply any transmission options that

have been configured. You can also disable the transmission options without

losing your settings. Use the schedule enable or schedule disable commands to

enable or disable transmission limiting.

Command SCHEDULE ENABLE

Description Enables the transmission schedule

Syntax SCHEDule <target> ENABLE