HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

64 of 332
Stopping, starting, pausing, and resuming
transmission
You can stop, start, pause, or resume transmission.
1. To start the transmission process, use the transmission start command.
Command TRANSMISSION START
Description Initiates the transmission pause
Syntax TRANSmission START <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address. Depending on the network route Storage Mirroring
Recover uses to access the target, you may need to specify the
fully qualified domain name.
Examples
transmission start beta
trans start beta
Notes
Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
2. To stop the transmission process, use the transmission stop command.
Command TRANSMISSION STOP
Description Stops the transmission pause
Syntax TRANSmission STOP <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address. Depending on the network route Storage Mirroring
Recover uses to access the target, you may need to specify the
fully qualified domain name.
Examples
transmission stop beta
trans stop beta
Notes
Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
3. To pause the transmission process, use the transmission pause command.
Command TRANSMISSION PAUSE