HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

61 of 332
● NOORPHANS—Does not move or delete orphan files on the
target
● CLEARRESTOREREQUIRED—Clears the restore required
flag and initiates the verification
Examples
● verify 1
● verify 2 sync, newer
● verify 2 every 2 hr
Notes
The default verification settings are sync, checksum, and
noorphans.
4. Use the VerifyLogName, VerifyLogAppend, and VerifyLogLimit options with
the get and set commands to configure the verification log.
Command GET
Description
Requests the value of a Storage Mirroring Recover program setting
from the specified server
Syntax GET <setting> [machine]
Options
● setting—See Server settings for a complete list of the
Storage Mirroring Recover program settings
● machine—Name of the machine
Examples
● get netport
● get VerifyLogName
● get DefaultAddress
Notes
● If you do not specify a machine name, the value from the
current source will be returned. If you have not identified an
active source, no data will be returned.
● Machine names that contain non-alphanumeric characters
must be enclosed in quotation marks.
Command SET
Description
Modifies the value of a Storage Mirroring Recover program setting
for the specified server
Syntax SET <setting>=<value> [machine]