HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

60 of 332
Examples
● source alpha
● sou alpha
Notes
Source names that contain non-alphanumeric characters must be
enclosed in quotation marks.
3. Initiate the verification process by using the verify command.
Command VERIFY
Description
Verifies the integrity of the data between the source and target
machines
Syntax
VERIFY <con_id> [ SYNC [,NEWER] | NOSYNC] [,CHECKSUM |
NOCHECKSUM] [STARTTIME=<mm/dd/yy> [hh:mm]] [EVERY <
number> <time_units>] [ORPHANS | NOORPHANS]
[CLEARRESTOREREQUIRED]
Options
● con_id—Connection ID assigned to the source/target
connection
● SYNC—Synchronizes any data that is different
● NEWER—Synchronizes only those files that are newer on
the source than on the target
● NOSYNC—Do not synchronize any data that is different
● CHECKSUM—Compares and/or synchronizes those blocks
that are different on the source than on the target based on
checksum comparisons
● NOCHECKSUM—Does not perform a checksum comparison
when comparing and/or synchronizing files
● STARTTIME—Starts the verification process at the time
specified
● mm/dd/yy—Date in month/day/year format when the
verification process will begin
● hh:mm—Time in hour:minute format using the 24-hour clock
when the verification process will begin
● EVERY—Repeat the verification process at the frequency
specified
● number—Length of time to repeat the verification process
● time_units—Minutes (min), hours (hr), or days (day)
● ORPHANS—Moves or deletes orphan files on the target