HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

51 of 332
Syntax SET <setting>=<value> [machine]
Options
● setting—See Server settings for a complete list of the
Storage Mirroring Recover program settings
● value—See Server settings for a complete list of the values
for each Storage Mirroring Recover program setting
● machine—Name of the machine
Examples
● set netport=1100
● set DefaultAddress="129.12.34.3"
Notes
● Some settings, although immediately applied to Storage
Mirroring Recover, will not take effect until the service is
restarted.
● If you do not specify a machine name, the value from the
current source will be updated. If you have not identified an
active source, no changes will be made.
● Options that contain non-alphanumeric characters must be
enclosed in quotation marks.
3. To disable orphan removal or deletion, use the orphans disable command.
Command ORPHANS DISABLE
Description
Disables orphan file removal during subsequent mirror or
verification processes.
Syntax ORPHANS DISABLE con_id
Options con_id—Connection ID assigned to the source/target connection
Examples orphans disable 1
4. To remove orphan files manually, use the orphans start command.
Command ORPHANS START
Description Manual operation to remove any orphan files on the target
Syntax ORPHANS START con_id [CLEARRESTOREREQUIRED]
Options
● con_id—Connection ID assigned to the source/target
connection
● CLEARRESTOREREQUIRED—Clears the restore required
flag and initiates the orphan operation