HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)
37 of 332
Pausing and resuming target processing
1. Pause the execution of operations on the target by using the pausetarget
command on a target that you are logged in to.
Command PAUSE TARGET
Description
Allows you to pause the execution of Storage Mirroring Recover
operations on the target
Syntax PAUSETARGET <target> [FROM <source>]
Options
● target—Name of the target, an IP address on the target, or a
virtual IP address
● source—Name of the source
Examples pausetarget beta
Notes
● You must be logged on to the target machine for this
command to work.
● If the target machine has not been identified using the target
command, you must specify the target name in the command.
● Options that contain non-alphanumeric characters must be
enclosed in quotation marks.
2. Resume the execution of operations on the target by using the resumetarget
command on a target that you are logged in to.
Command RESUME TARGET
Description
Allows you to resume the execution of Storage Mirroring Recover
operations on the target
Syntax RESUMETARGET <target> [FROM <source>]
Options
● target—Name of the target, an IP address on the target, or a
virtual IP address
● source—Name of the source
Examples resumetarget beta
Notes
● You must be logged on to the target machine for this
command to work.
● Options that contain non-alphanumeric characters must be
enclosed in quotation marks.