HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

325 of 332
Verify
Command VERIFY
Description
Verifies the integrity of the data between the source and target
machines
Syntax
VERIFY <con_id> [ SYNC [,NEWER] | NOSYNC] [,CHECKSUM |
NOCHECKSUM] [STARTTIME=<mm/dd/yy> [hh:mm]] [EVERY <
number> <time_units>] [ORPHANS | NOORPHANS]
[CLEARRESTOREREQUIRED]
Options
● con_id—Connection ID assigned to the source/target
connection
● SYNC—Synchronizes any data that is different
● NEWER—Synchronizes only those files that are newer on
the source than on the target
● NOSYNC—Do not synchronize any data that is different
● CHECKSUM—Compares and/or synchronizes those blocks
that are different on the source than on the target based on
checksum comparisons
● NOCHECKSUM—Does not perform a checksum comparison
when comparing and/or synchronizing files
● STARTTIME—Starts the verification process at the time
specified
● mm/dd/yy—Date in month/day/year format when the
verification process will begin
● hh:mm—Time in hour:minute format using the 24-hour clock
when the verification process will begin
● EVERY—Repeat the verification process at the frequency
specified
● number—Length of time to repeat the verification process
● time_units—Minutes (min), hours (hr), or days (day)
● ORPHANS—Moves or deletes orphan files on the target
● NOORPHANS—Does not move or delete orphan files on the
target
● CLEARRESTOREREQUIRED—Clears the restore required
flag and initiates the verification