HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

299 of 332
Set Local
Command SET LOCAL
Description
Modifies the value of a Storage Mirroring Recover program setting
for the local machine
Syntax SETLOCAL <setting>=<value>
Options
● setting—See Server settings for a complete list of the
Storage Mirroring Recover program settings
● value—See Server settings for a complete list of the values
for each Storage Mirroring Recover program setting
Examples
● setlocal netport=1100
● setlocal DefaultAddress="129.12.34.3"
Notes
● Some settings, although immediately applied to Storage
Mirroring Recover, will not take effect until the service is
restarted.
● Program setting values that contain non-alphanumeric
characters must be enclosed in quotation marks.