HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

290 of 332
Schedule Window
Command SCHEDULE WINDOW
Description
Sets criteria to only allow transmissions during a certain period of
time
Syntax SCHEDule <target> WINDOW <hh:mm> TO <hh:mm>
Options
● target—Name of the target, an IP address on the target, or a
virtual IP address Depending on the network route Storage
Mirroring Recover uses to access the target, you may need to
specify the fully qualified domain name.
● hh:mm—Time in hour:minute format using the 24-hour clock.
The first time is when the transmission will begin and the
second time is when the transmission will end.
Examples
● schedule beta window 23:00 to 06:00
● sche beta window 20:00 to 4:00
Notes
● Establishing a transmission window by itself is not sufficient
to start a transmission. You will need to specify a start criteria.
● Target names that contain non-alphanumeric characters must
be enclosed in quotation marks.