HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

288 of 332
Schedule End
Command SCHEDULE END
Description
Sets criteria to end the transmission of data from the source to the
target
Syntax
SCHEDule <target> END [ DURATION = <number> <time_units
> ] [ BYTES = <bytes> ]
Options
● target—Name of the target, an IP address on the target, or a
virtual IP address Depending on the network route Storage
Mirroring Recover uses to access the target, you may need to
specify the fully qualified domain name.
● number—Any number indicating the length of time before the
transmission ends
● time_units—Minutes (min), hours (hr), or days (day)
● bytes—Number of bytes transmitted before the transmission
ends
Examples
● schedule beta end duration=3 hr bytes=1500000
● sched beta end duration=6 hr
Notes
● If you use both of the end options, duration and bytes, the
transmission will be stopped when the first end option value
is met.
● Target names that contain non-alphanumeric characters must
be enclosed in quotation marks.