HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

282 of 332
Restore
Command RESTORE
Description Initiates the restoration process
Syntax
RESTORE <repset> FROM <target> ORIGINAL <original_
source> [, OVERWRITE | NOOVERWRITE] [,
OVERWRITENEWER | NOOVERWRITENEWER] [,
USETARGETDB | NOUSETARGETDB] [, RESTOREDBTOO |
NORESTOREDBTOO] [, CHECKSUM | NOCHECKSUM][,
ORPHANS | NOORPHANS]
Options
● repset—Name of the replication set
● target—Name of the target, an IP address on the target, or a
virtual IP address
● original_source—Name of the original source
● OVERWRITE—Overwrites files on the source
● NOOVERWRITE—Does not overwrite files on the source
● OVERWRITENEWER—Overwrites files on the source even if
the source file is newer than on the target
● NOOVERWRITENEWER—Does not overwrite files on the
source that are newer on the source than on the target
● USETARGETDB—Uses the replication set from the target
machine
● NOUSETARGETDB—Uses the replication set from the
source machine
● RESTOREDBTOO—Restores the replication set database
from the target to the source
● NORESTOREDBTOO—Does not restore the replication set
database from the target to the source
● CHECKSUM—Performs a block checksum comparison and
only restores those blocks that are different
● NOCHECKSUM—Does not perform a block checksum
comparison and restores those files that are different
● ORPHANS—Moves or deletes orphan files on the source
● NOORPHANS—Does not move or delete orphan files on the
source