HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

24 of 332
Command SET
Description
Modifies the value of a Storage Mirroring Recover program setting
for the specified server
Syntax SET <setting>=<value> [machine]
Options
● setting—See Server settings for a complete list of the
Storage Mirroring Recover program settings
● value—See Server settings for a complete list of the values
for each Storage Mirroring Recover program setting
● machine—Name of the machine
Examples
● set netport=1100
● set DefaultAddress="129.12.34.3"
Notes
● Some settings, although immediately applied to Storage
Mirroring Recover, will not take effect until the service is
restarted.
● If you do not specify a machine name, the value from the
current source will be updated. If you have not identified an
active source, no changes will be made.
● Options that contain non-alphanumeric characters must be
enclosed in quotation marks.