HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

223 of 332
Limit Bandwidth Schedule Enable
Command LIMIT BANDWIDTH SCHEDULE ENABLE
Description Enables a bandwidth schedule
Syntax LIMIT BANDWIDTH SCHEDULE ENABLE ON <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address. Depending on the network route Storage Mirroring
Recover uses to access the target, you may need to specify the
fully qualified domain name.
Examples limit bandwidth schedule enable on beta
Notes
Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.