HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

221 of 332
Limit Bandwidth Schedule Add
Command LIMIT BANDWIDTH SCHEDULE ADD
Description
Creates a scheduled bandwidth event for limiting transmission of
data from the source to the target
Syntax
LIMIT BANDWIDTH SCHEDULE ADD <label> DAYS=<day1>[,
day2,..., dayN] STARTTIME=<hh:mm> LIMIT=<bytes>, <
seconds> | UNLIMITED TO <target>
Options
● label—Unique name that identifies this bandwidth scheduling
event
● day1, day2,..., dayN—Day(s) of the week that you want to
schedule the bandwidth limitation for. You can either spell out
the entire day or use just the first two letters of the day.
● hh:mm—Time, using a 24-hour clock, to indicate when this
event will start
● bytes—Number of bytes to be transmitted
● seconds—Number of seconds to wait before transmitting
again
● UNLIMITED—Bandwidth is not limited during this scheduled
event
● target—Name of the target, an IP address on the target, or a
virtual IP address. Depending on the network route Storage
Mirroring Recover uses to access the target, you may need to
specify the fully qualified domain name.
Examples
● limit bandwidth schedule add weekday days=Mo, Tu, We, Th,
Fr starttime=06:00 limit=19300 5 to beta
● limit bandwidth schedule add weekend days=Sa, Su
starttime=04:00 limit=unlimited to beta
Notes
● This command transmits in bursts, not bytes per seconds.
The time identifies how long to wait before transmitting again.
For example, if 5 seconds are specified and it only takes 2
seconds to send the specified bytes, Storage Mirroring
Recover will wait an additional 3 seconds before transmitting
again.
● Options that contain non-alphanumeric characters must be
enclosed in quotation marks.