HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

208 of 332
Email Set Filter Include
Command EMAIL SETFILTERINCLUDE
Description Specifies which Event Viewer messages are sent via e-mail
Syntax
EMAIL SETFILTERINCLUDE [INFO, WARNING, ERROR]
[EXCLUDEIDS "<ID1,ID2-ID4,...>"]
Options
● INFO—Information messages will be sent via e-mail
● WARNING—Warning messages will be sent via e-mail
● ERROR—Error messages will be sent via e-mail
● EXCLUDEIDS ID1,ID2-ID4,...—A comma separated list of IDs
or ID ranges. A space should separate the EXCLUDEIDS
switch from the list but within the list, there should be no
spaces. Ranges are specified with a begin and end number
and separated with a dash (-). The entire list should be
enclose in quotation marks.
Examples
● email setfilterinclude warning, error
● email setfilterinclude warning, error excludeids "4007, 4012,
4015"
● email setfilterinclude excludeids "4000-4010, 5100"
Notes
● The default settings for this command are info and warning.
No IDs are excluded, by default.
● The options info, warning, and error can be used in any
combination and in any order. The first option does not
require a comma, but the second and remaining options do
require a comma before the option.
● When changing the filter options, e-mail notification will
automatically be stopped and restarted. If a failure occurs
while stopping or restarting e-mail notification, Storage
Mirroring Recover will output a related error message
● You must have an active source specified for any e-mail
command to work properly.