HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

197 of 332
Examples
● connect DataFiles to beta map exact
● connect UserData to beta map base d:\UserData\
● connect UserFiles to beta map exact orphans, compression 2
● con DataFiles to beta map exact mir, compress 1
Notes
● The default settings for this command are mirror, replicate,
nomonitor, and noorphans.
● The options (no)mirror, (no)replicate, (no)monitor,
(no)orphans, and compression can be used in any
combination and in any order. The first option does not
require a comma, but the second and remaining options do
require a comma before the option.
● Options that contain non-alphanumeric characters must be
enclosed in quotation marks.
● If you are establishing a connection within a NAT or firewall
environment, you will need to specify the target using the IP
address and port number (separated by a colon) of the router.
For example, connect DataFiles to 10.10.1.57:1105 map
exact.
● When scripting with this command, if a successful connection
is established, the command will return a positive number,
which is the connection ID assigned to that connection.