HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

163 of 332
Server Setting Description
TGMirrorCapacityLow
Minimum percentage of system memory that can contain
mirror data before the target signals the source to resume
the sending of mirror operations.
Values: 1-75
Default: 15
GUI Setting: Server Properties, Target tab, Files, Target
Mirror Capacity Low Percentage
The maximum value forTGMirrorCapacityLow is either 75
or TGMirrorCapacityHigh, which ever is lower.
TGMoveFilesOnDelete
Specifies whether files deleted on the source are actually
moved to a different location on the targer rather than
being deleted on the target
Values: 0 Files deleted on the source will be deleted on
the target, 1 Files deleted on the source will be moved to a
different location on the target
Default: 0
GUI Setting: Server Properties, Target tab, Move Deleted
Files, Moved deleted files to the following location
If this option is enabled, the deleted files will be moved to
the location specified in TGMoveFilesPath.
TGMoveFilesPath
Specifies where deleted files on the source are being
moved to on the target
Values: any valid path
Default: <null>
GUI Setting: Server Properties, Target tab, Move Deleted
Files, Moved deleted files to the following location
TGRetryLocked
Minimum number of seconds to wait before retrying a
failed operation on a target
Values: 0-65536
Default: 3
GUI Setting: Server Properties, Target tab, Queues, Retry
Delay for Incomplete Operations