HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

132 of 332
Server Setting Description
IgnoreDeleteOps
Specifies if file and directory delete operations will be
replicated to the target
Values: 0 Delete operations are replicated to the target, 1
Delete operations are not replicated to the target
Default: 0
GUI Setting: Server Properties, Source tab, Replication,
Ignore Delete Operations
IgnorePPPAddresses
Identifies if Storage Mirroring Recover will use PPP (Point-
to-Point Protocol) or SLIP (Serial Line Internet Protocol)
adapters
Values: 0 Storage Mirroring Recover will send out
heartbeats across the PPP/SLIP adapter, 1 Storage
Mirroring Recover will not send out heartbeats across the
PPP/SLIP adapter
Default: 1
GUI Setting: None
IgnoreThumbnailStreams
Specifies if thumbnails will be replicated to the target.
Values:0 Storage Mirroring Recover will mirror and
replicate all data streams, 1 Storage Mirroring Recover will
not mirror or replicate any data about the alternate data
streams for thumbnail images. When comparing data for a
verification or difference mirror,alternate data streams for
thumbnails will not be reported as different.
Default: 1
GUI Setting: None
If you change this value to 0, you must restart the Storage
Mirroring service in order for the Storage Mirroring
Recover driver to begin sending all data stream
information to the service. If you change this value to 1,
you do not need to restart the service.