HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

131 of 332
Server Setting Description
HeartbeatIgnoreIPs
Indicates the IP address(es) to be ignored by the
Management Console. An ignored IP address will not be
displayed in the Management Console servers tree.
Values: a semi-colon separate list of IP addresses in the
format x.x.x.x
Default: none
GUI Setting: None
HPQueueRatio
Ratio of replication packets to one mirror packet
Values: 0 - 65535
Default: 5
GUI Setting: Server Properties, Source tab, Queue Ratio,
Replication Packets to 1 Mirror Packet
An HPQueueRatio of 5 indicates 5 replication packets to 1
mirror packet. If you change this value, the source service
must be stopped and restarted to implement the change.
IgnoreAlternateStreamFiles
Specifies alternate streams to skip during mirroring and
replication
Values: a semi-colon separate list of stream names. The
stream names are not case-sensitive
Default: none
GUI Setting: None
IgnoreArchiveBit
Specifies if the archive bit is compared during verification
Values:0 Archive bit is compared during a verification, 1
Archive bit is not compared during a verification
Default: 1
GUI Setting: None