HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

129 of 332
Server Setting Description
FileAccessRetry
The number of times a failed driver call will be retried by
the service.
Values: 1 - 65535
Default: 10
GUI Setting: None
FileQueueSize
When a mirror is started, one thread reads from the disk
and builds the file queue. Another set of threads reads
files off of the queue and sends them to the target. This
setting is the maximum size of the queue in entries. If you
had 100 files to be mirrored and this was set to 16 (the
default value), the first thread would fill the queue to a
maximum of 16 entries.
Values: 1 - 65535
Default: 16
GUI Setting: None
This value must be set prior to starting the mirror process.
The higher the number, the more memory that is used.
ForceReplaceOnFailover
Specifies additional failover options
Values: 0 Use standard failover add / replace settings with
no additional settings, 1 Replace the target server name
with that of the source and add the source IP address, 2
Add the source server name to the target and replace the
target IP address, 3 Replace the target server name with
that of the source and replace the target IP address
Default: 0
GUI Setting: Failover Control Center, Monitor Settings,
Failover Method