HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

128 of 332
Server Setting Description
FailbackHostname
Returns the host SPN (Service Principle Name) to its
original setting on failback
Values: 0 Disabled, 1 Enabled
Default: 0
GUI Setting: Failover Control Center, Monitor Settings,
Active Directory, Failback Hostname
If you are using Active Directory, this option should be
enabled or you may experience problems with failback.
FailoverHostname
Automatically removes the host SPN (Service Principle
Name) from Active Directory on the source
Values: 0 Disabled, 1 Enabled
Default: 0
GUI Setting: Failover Control Center, Monitor Settings,
Active Directory, Failover Hostname
If you are using Active Directory, this option should be
enabled or you may experience problems with failover.
FailoverOnRouteFailure
Determines if failover will occur when receiving a router
message back from an IP address on the network
Values: 0 Failover will not occur when receiving a
destination host unreachable message, 1 Failover will
occur when receiving a destination host unreachable
message
Default: 1
GUI Setting: None
FCCHelpPath
The path and file name to the Failover Control Center
online help file
Default: C:\Program Files\StorageWorks\Storage
Mirroring\online help\fcc\ wwhelp.htm
GUI Setting: None Do not change this value or the online
help will not work.