HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

123 of 332
Server Setting Description
EmailEnabled
Specifies if e-mail notification is enabled
Values: 0 E-mail notification is disabled, 1 E-mail
notification is enabled
Default: 0
GUI Setting: Server Properties, E-mail Notification tab,
Enable notification
This is a read-only setting. If you change this setting using
the DTCL SET command or via the registry editor, e-mail
notification will not automatically start. You must use the
GUI or the DTCL EMAIL ENABLE command to start e-mail
notification.
EmailExcludeIds
Identifies the Windows Event Viewer messages that are
excluded from e-mail notification.
Values: Comma or semicolon separated list of Event
Viewer IDs. You can indicate ranges within the list.
Default: None
GUI Setting: Server Properties, E-mail Notification tab,
Exclude these Event IDs
You must disable and re-enable e-mail notification for a
change to take effect.
EmailFromAddress
Specifies the e-mail address that will appear in the From
field of Storage Mirroring Recover generated e-mail
messages.
Values: Any valid e-mail address, up to 256 characters
Default: None
GUI Setting: Server Properties, E-mail Notification tab,
From Address