HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

118 of 332
Server Setting Description
AutoRetransmit
Determines whether or not a source that has lost its
connection with a target will attempt to reconnect to the
target
Values: 0 Do not attempt to reconnect, 1 Attempt to
reconnect
Default: 1
GUI Setting: None
BackupDir
Location on the target of the backup of the replication sets
Values: any valid path
Default: the location where the Storage Mirroring Recover
files were installed
GUI Setting: None
CalculateByVolume
Calculates the approximate size of a replication set by
using the size of the volume and subtracting the free
space
Values: 0 Disabled, 1 Enabled
Default: 0
GUI Setting: None
If your replication set contains a large number of files, for
example, ten thousand or more, you may want to disable
the calculation of the replication set size so that data will
start being mirrored sooner. If calculation is enabled, the
source calculates the file size before it starts mirroring.
This can take a significant amount of time depending on
the number of files and system performance.
Disabling calculation will result in the mirror status not
showing the percentage complete or the number of bytes
remaining to be mirrored. CalculateByVolume can be
enabled as a workaround. This setting will get the amount
of disk space in use for the entire volume from the
operating system, so the calculation occurs
instantaneously. However, if the entire volume is not being
replicated, the mirror percentage complete and bytes
remaining will be incorrect accordingly.