HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

112 of 332
Configuring server settings
While only a subset of the server settings are available through the Management
Console, all of the Storage Mirroring Recover server settings are accessible through the
get and set commands. See Server settings for a complete list of the server settings.
● Retrieving setting values—To retrieve the current value of a setting, use the get
command. This command will return the value of the specified setting from the
specified server.
Command GET
Description
Requests the value of a Storage Mirroring Recover program setting
from the specified server
Syntax GET <setting> [machine]
Options
● setting—See Server settings for a complete list of the
Storage Mirroring Recover program settings
● machine—Name of the machine
Examples
● get netport
● get VerifyLogName
● get DefaultAddress
Notes
● If you do not specify a machine name, the value from the
current source will be returned. If you have not identified an
active source, no data will be returned.
● Machine names that contain non-alphanumeric characters
must be enclosed in quotation marks.
● Updating setting values—To update the value of a setting, use the set command.
This command will modify the value of the specified setting on the specified
server.
Command SET
Description
Modifies the value of a Storage Mirroring Recover program setting
for the specified server
Syntax SET <setting>=<value> [machine]
Options
● setting—See Server settings for a complete list of the
Storage Mirroring Recover program settings