HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

110 of 332
Syntax TARget <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address
Examples
● target beta
● tar beta
Notes
● You must be logged into a machine using the login command
before using the target command.
● Target names that contain non-alphanumeric characters must
be enclosed in quotation marks.
4. Specify your active monitor by using the monitor get command.
Command MONITOR GET
Description Identifies a machine as the active monitor machine
Syntax MONitor GET <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address
Examples
● monitor get beta
● mon get beta
Notes
Monitor names that contain non-alphanumeric characters must be
enclosed in quotation marks.
5. Initiate failback by using the failback command. If you specified a pre-failback
script in your failover configuration, that script will be executed at this time.
Note:
The source machine must be online and Storage Mirroring Recover must
be running to ensure that the source post-failback script can be started. If
the source has not completed its boot process, the command to start the
script may be lost and the script will not be initiated.
Command FAILBACK
Description Initiates the failback process for the specified monitor machine
Syntax
FAILBACK <monitor> [ON <target>]
REMONITOR|NOREMONITOR