HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

107 of 332
Stopping failover monitoring
1. Specify your active monitor by using the monitor get command.
Command MONITOR GET
Description Identifies a machine as the active monitor machine
Syntax MONitor GET <target>
Options
target—Name of the target, an IP address on the target, or a virtual
IP address
Examples
● monitor get beta
● mon get beta
Notes
Monitor names that contain non-alphanumeric characters must be
enclosed in quotation marks.
2. To stop failover monitoring, use the monitor stop command.
Command MONITOR STOP
Description Stops monitoring the source machine for failure
Syntax MONitor STOP <monitor> [ON <target>]
Options
● monitor—Name of the source machine designated as the
monitor
● target—Name of the target, an IP address on the target, or a
virtual IP address
Examples
● monitor stop alpha on beta
● mon stop alpha
Notes
Option names that contain non-alphanumeric characters must be
enclosed in quotation marks.