HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

103 of 332
Command MONITOR SCRIPT REMOVE
Description
Specifies the scripts that should not be run during the failover and
failback processes
Syntax MONitor SCRIPT REMove <type> [monitor]
Options
● type—Any of the following script types
● PREFAILOVER—The file is a pre-failover script to be
run on the target before failover
● POSTFAILOVER—The file is a post-failover script to be
run on the target after failover
● PREFAILBACK—The file is a pre-failback script to be
run on the target before failback
● POSTFAILBACK—The file is a post-failback script to be
run on the target after failback
● SRCPOSTFAILBACK—The file is a post-failback script
to be run on the source after failback
● monitor—Name of the source machine designated as the
monitor
Examples
● monitor script remove prefailback
● mon script rem postfailover
Notes
● If you do not specify a monitor, the current source designated
as the monitor will be used. If you have not identified a
monitor, you will receive an error message stating that a
monitor has not been selected.
● Monitor names that contain non-alphanumeric characters
must be enclosed in quotation marks.
11. Review your failover settings by using the monitor display command.
Command MONITOR DISPLAY
Description
Displays the monitoring and failover configuration settings for the
specified monitor machine
Syntax MONitor DISPlay <monitor>
Options monitor—Name of the source machine designated as the monitor
Examples
● monitor display alpha
● mon disp alpha