HP StorageWorks Storage Mirroring Recover Scripting Guide (T5437-96009, November 2009)

98 of 332
settings can be different.
● Monitor names that contain non-alphanumeric characters
must be enclosed in quotation marks.
6. To remove an IP address from an established monitor, use the monitor remove
command.
Command MONITOR REMOVE
Description Removes an IP address that is currently being monitored
Syntax MONitor REMove <IP_address> [monitor]
Options
● IP_address—The currently monitored IP address that should
be removed
● monitor—Name of the source machine designated as the
monitor
Examples
● monitor remove 205.31.2.57 alpha
● mon rem 205.31.2.68
Notes
● If you do not specify a monitor, the current source designated
as the monitor will be used. If you have not identified a
monitor, you will receive an error message stating that a
monitor has not been selected.
● Monitor names that contain non-alphanumeric characters
must be enclosed in quotation marks.
7. Configure the failover settings by using the monitor option command.
Command MONITOR OPTION
Description Configures the settings to determine how failover will be performed
Syntax
MONitor OPTION [MOVENAME | NOMOVENAME] [,
MOVEADDRESSES | NOMOVEADDRESSES] [, MOVESHARES
| NOMOVESHARES] [, ADD | REPLACE] [, USESHAREFILE |
NOUSESHAREFILE][, FAILONE | FAILALL] [, FODELAY |
NOFODELAY] [, FBDELAY | NOFBDELAY] [, APPLY | DISCARD |
REVERT] [, INTERVENTION | NOINTERVENTION] [,
FOHOSTNAME | NOFOHOSTNAME] [, FBHOSTNAME |
NOFBHOSTNAME] [monitor]