HP Storageworks Storage Mirroring Console user's guide (T2558-96330, April 2009)

4 - 6
Enter the following information for the target server:
1. Server—Enter or select the IP address or DNS name of the target server that will host the
virtual replica machines. Or, click the Browse
button to locate a server.
a. In the Browse for server window, browse through the file tree to locate a target server.
b. After you have found the target server, select it, then click OK.
2. User name—Enter the user name for the account that will access the target host.
3. Password—Enter the password that is associated with the user account.
4. Storage Mirroring port—If you have changed the default port (6320) used by the Storage
Mirroring server, specify the port.
5. After all fields have been completed, click Next. A window will display the progress.
NOTE: If you enter the fully-qualified domain name for the server, the Storage Mirroring
Console will resolve the entry to the server short name. This could result in name
resolution issues for servers with the same short name that reside in two different
domains. To avoid this, enter the IP address of the server.
NOTE: The user account entered here must have administrative rights for Microsoft Hyper-V
on that server, and be a member of the Storage Mirroring administrators group.
If this is a domain user account, you may enter a fully-qualified user name. The
fully-qualified user name must be in the format domain\username or
username@domain.