HP OpenView Storage Mirroring Getting Started (359447-001, May 2004)

11
Example DTSetup.ini for Full Installation
DTService
Startup
If you are using the
DTNT option, specify:
! Y or 1—Start the Storage Mirroring service automatically
! N or 0—Do not start the Storage Mirroring service
automatically
DTFailover
Startup
If you are using Windows NT 4.0 and have specified the
DTNT
option, the specify:
! Y or 1—Configure the machine for failover
! N or 0—Do not configure the machine for failover
Placeholder
Count
If you are using Windows NT 4.0 and
DTFailoverStartup
is enabled (
Y or 1), enter any integer between 1 and 99 to create
that number of IP address placeholders on each NIC.
Netport If you are using Storage Mirroring in a NAT environment, enter any
integer between
1024 and 65535 to identify the port for TCP
communications.
DirU
Netport
If you are using Storage Mirroring in a NAT environment, enter any
integer between
1024 and 65535 to identify port for TCP
communications.
UNetport If you are using Storage Mirroring in a NAT environment, enter any
integer between
1024 and 65535 to identify the port for UDP
communications.
[Double-Take]
DTSETUPTYPE=DTNT
DTACTIVATIONCODE=01a2b000304c056d
AUTOREBOOT=Y
[Windows]
DOUBLETAKEFOLDER="
C:\Program Files\OpenViewStorage
Mirroring
"
DISKQUEUEFOLDER="C:\Program Files\OpenViewStorage
Mirroring
"
DISKQUEUEMAXSIZE=UNLIMITED
DISKFREESPACEMIN=50
MANAGEMENTCONSOLE=Y
TEXTTOOLS=Y
CLUSTERCLIENT=Y
SNMP=N
CLUSTERSERVER=Y
DTSERVICESTARTUP=1
DTFAILOVERSTARTUP=1
PLACEHOLDERCOUNT=5
NETPORT=1100
DIRUNETPORT=1105
UNETPORT=1100
Entry Valid Parameters