HP StorageWorks Scalable File Share System Installation and Upgrade Guide Version 2.2

Configuring a factory-installed system4–6
Specify the IP address of the router on your site network.
Enter the Gateway IP (e.g. 1.2.3.4 or None) [None]: 16.123.123.250
Specify the IP address of a DNS server.
Enter the DNS server (1) (e.g. 1.2.3.4 or None) [None]: 16.123.123.250
Enter the DNS server (2) (e.g. 1.2.3.4 or None) [None]:
Enter the IP address of an NTP server. If DNS is configured it may be
appropriate to enter the hostnames of the NTP servers rather than their
IP addresses.
If you do not specify an NTP server the system time will not be correct.
Enter the NTP server (1) (e.g. myhost or 1.2.3.4 or None) [None]: myntpserver
Enter the NTP server (2) (e.g. myhost or 1.2.3.4 or None) [None]:
Enter the IP address of the mail server on your site network. If DNS
is configured it may be appropriate to enter the hostname of the mail
server rather than the IP address.
Enter the Mail Server (e.g. myhost or 1.2.3.4 or None) [None]: mymailserver
When an alert triggers, an email is sent. Specify a comma
seperated list of email addresses. For example:
root@16.123.123.20,pager@16.123.123.22
Enter the Default Alert e-mail address [root]: sysadmin@mycompany.com
The Network Services configuration is
Gateway IP 16.123.123.250
DNS server (1) 16.123.123.250
DNS server (2) None
NTP server (1) myntpserver
NTP server (2) None
Mail Server mymailserver
Default Alert e-mail address sysadmin@mycompany.com
Is this correct? [yes]:
This menu allows you to specify or update configuration data. If
you are not happy with any of the data you have entered, you may
reenter it again. Your changes do not take affect until you exit.
If you choose to quit, all changes you have made are discarded.
At any stage you can enter ? to get more help on the topic.
To update data select one or all of the following sections:
1) System
2) Configure Networks
3) Network Services
4) Management Network
5) iLO Access
6) Storage
a) All of the above
e) Exit (save updates)
q) Quit (discard updates)
Enter your choice [a]: