HP StorageWorks Scalable File Share System Installation and Upgrade Guide Version 2.2

Step 3: Connecting the system to the site network 4–5
6. Enter c to exit from the menu, and then enter c again to exit from the Configure Networks menu,
as shown in the following example:
Enter your choice [a]: c
Configure Networks -------------------------------------------------------------
This section is used to configure Gigabit Ethernet, InfiniBand and
Quadrics networks on all servers. These networks are used as interconnects
to client systems. If you do not have a Gigabit Ethernet / InfiniBand /
Quadrics interconnect you can proceed to the next section.
1) Configure Gigabit Ethernet Networks
2) Configure InfiniBand Interconnect
3) Configure Quadrics Interconnect
a) All of the above
n) Next Section
p) Previous Section
c) Cancel
Enter your choice [a]: c
This menu allows you to specify or update configuration data. If
you are not happy with any of the data you have entered, you may
reenter it again. Your changes do not take affect until you exit.
If you choose to quit, all changes you have made are discarded.
At any stage you can enter ? to get more help on the topic.
To update data select one or all of the following sections:
1) System
2) Configure Networks
3) Network Services
4) Management Network
5) iLO Access
6) Storage
a) All of the above
e) Exit (save updates)
q) Quit (discard updates)
Enter your choice [a]:
7. Enter 3 to select the Network Services option, and then enter the IP address of the default
gateway router, and the IP addresses or host names of the DNS servers, NTP servers and a mail
server, as shown in the following example. You can also enter a default email address for email
alerts. In this example, DNS is configured, and the host names of the NTP servers and mail servers
are entered instead of IP addresses:
Enter your choice [a]: 3
Network Services --------------------------------------------------------------
This section determines how the system is connected to your site network.
1) Gateway IP None
2) DNS server (1) None
3) DNS server (2) None
4) DNS server (3) None
5) NTP server (1) None
6) NTP server (2) None
7) NTP server (3) None
8) Mail Server None
9) Default Alert e-mail address root
a) All of the above
n) Next Section
p) Previous Section
c) Cancel
Enter your choice [a]: