HP StorageWorks Scalable File Share System Installation and Upgrade Guide Version 2.2

Overview1–30

1.6.12The SFS20 storage array

Figure 1-25 shows how SFS20 storage arrays are connected to ProLiant DL380 servers.

Figure 1-25 SFS20 storage array

The configuration shown here consists of a pair of servers and their associated SFS20 storage. This

configuration corresponds to two Object Storage Servers and their associated SFS20 storage. As shown in

Figure 1-25, each server has at least one SFS20 storage array attached to it. In addition, more SFS20

storage arrays can optionally be connected (as shown greyed out).

The server and SFS20 storage array are connected by UltraSCSI U360 cables. The SFS20 storage array

has two ports, which are marked as A and B on the array. One port is connected to a port on the Smart

Array 6404 adapter of one server, the other port is connected to the second server. It does not matter which

SFS20 port (A or B) is used. However, the same 6404 port must be used on both servers. Where two Smart

Array 6404 adapters are present on one or both of the servers in the server pair, the array must be

A1 A2

B1 B2

A1 A2

B1 B2

DL380

SFS20 Enclosure