HP StorageWorks Scalable File Share System Installation and Upgrade Guide Version 2.2

Index–1
A
ADG redundancy (SFS20 arrays) 5-21
administration LUN, identifying for
administration server (EVA4000
storage) 6-25
administration server
configuring in systems using
EVA4000 storage 6-24
configuring in systems using SFS20
storage 7-24
installing in systems using EVA4000
storage 6-6
installing in systems using SFS20
storage 7-6
administration service 2-27
arrays
assigning to servers 2-28
See also EVA4000 arrays, SFS20
arrays
assigning roles to servers 2-27
attributes
enable_readcache 9-5
lustre.groups_server 9-4
lustre.groups_ssh_timeout 9-5
lustre.groups_user 9-4
portals_compatibility 8-13, 8-18
readcache_size 9-5
B
bonded Gigabit Ethernet interconnect
connections 1-25
bonded Gigabit Ethernet interconnects
1-17
bonded Gigabit Ethernet network
considerations 2-17
C
changing root user password 6-24,
7-20
Checklists C-1
Command View EVA Web interface,
using 5-14
configuring
administration server in systems using
EVA4000 storage 6-24
administration server in systems using
SFS20 storage 7-24
disk groups using Command View
EVA Web interface 5-16
disk groups using SSSU utility 5-12
EVA4000 arrays 5-10
factory-installed system 4-1
iLO settings 6-3, 6-4, 7-2, 7-3
mail server 9-2
MDS server in systems using
EVA4000 storage 6-27
MDS server in systems using SFS20
storage 7-26
Object Storage Servers in systems
using EVA4000 storage 6-32
Object Storage Servers in systems
using SFS20 storage 7-29
Option ROM Configuration for
Arrays 6-3, 7-2
ProLiant DL servers 6-2, 7-2
ROM-Based Setup Utility 6-4, 7-4
SFS20 arrays for administration
server 7-22
SFS20 arrays for Object Storage
Servers 7-30
storage 5-1
storage for administration server in
systems using SFS20 storage 7-21
supplementary groups 9-2
support for supplementary groups
9-4
system parameters 6-10, 7-6
connection
to site network 2-25
creating
host entry for administration and
MDS servers 6-7
host entry for Object Storage Servers
6-33
virtual disks using Command View
EVA Web interface 5-17
virtual disks using SSSU utility 5-12
D
disk groups
configuring using Command View
EVA Web interface 5-16
configuring using SSSU utility 5-12
downgrading a system 8-19
dual Gigabit Ethernet interconnect
connections 1-24
dual Gigabit Ethernet interconnects
1-17
E
email alert addresses
configuring defaults 6-42, 7-37
reviewing after upgrade 8-17
Ethernet packets, configuring switches
for non-standard packets G-1, H-1
EVA4000 arrays
configuring disk groups using
Command View EVA Web
interface 5-16
configuring disk groups using SSSU
utility 5-12
configuring IP addresses for Fibre
Channel switches 5-10
configuring multiple servers I-1
configuring using Command View
EVA Web interface 5-14
configuring using SSSU utility 5-11
connection to servers 1-29
creating host entries for Object
Storage Servers 6-33
creating host entry for administration
and MDS servers 6-7
creating virtual disks using Command
View EVA Web interface 5-17
creating virtual disks using SSSU
utility 5-12
identifying LUNs for administration
server 6-25
identifying WWIDs using Command
View EVA Web interface 5-16
identifying WWIDs using SSSU utility
5-12
initializing 5-11
overview 1-5
planning 5-2
presenting virtual disks to
administration server 6-9
presenting virtual disks to MDS server
6-28
presenting virtual disks to Object
Storage Servers 6-36
topology 1-9
verifying switch firmware version
5-10
F
factory-installed system, configuring 4-1
firmware
verifying version for SFS20 arrays
(administration server) 7-21
verifying version for SFS20 arrays
(Object Storage Servers) 7-30
verifying version for Smart Array
6404 adapters (administration
server) 7-21
verifying version for Smart Array
6404 adapters (MDS server) 7-27
verifying version for Smart Array
6404 adapters (Object Storage
Servers) 7-30
G
Gigabit Ethernet interconnect
assigning IP addresses 2-10
connections 1-23
group server
setting up 9-3
H
hardware
overview 1-19
Index