HP StorageWorks Scalable File Share System Installation and Upgrade Guide Version 2.2

WorksheetsB–2
Use the worksheet in Table B-4 to record the Quadrics interconnect information you gather in Section 2.4.5.
Use the worksheet in
Table B-5 to record the site network connection information you gather in Section 2.5.
Use the worksheet in Table B-6 to record the management network information you gather in Section 2.6
and the iLO information (iLO user name
1
and iLO password) that you identify in Section 2.7.
Table B-4 Quadrics interconnect information worksheet
Parameter Value
Quadrics Machine ID
Table B-5 Site network connection worksheet
Parameter Value
IP address of default gateway router
IP address of DNS server 1
IP address of DNS server 2
IP address of DNS server 3
IP address (or host name) of NTP server 1
IP address (or host name) of NTP server 2
IP address (or host name) of NTP server 3
IP address (or host name) of mail server
Default alert email address
1.When shipped from the factory, the default iLO user name is Administrator. Do not change this default unless advised to do so
by your HP Customer Support representative. If you need to change the user name, you do so through the iLO Access menu during
system installation (see Section 6.8.5 or Section 7.4.5, depending on the type of storage used).
Table B-6 Management network information worksheet
Parameter Value
Management network start IP address (default is
192.168.8.1)
Management network netmask (default is
255.255.0.0)
NIC attached to management network (default is NIC 1,
seen as eth0 from Linux)
IP alias on management network (default is
192.168.0.1)
iLO start IP address
iLO User Name
iLO Common Password