HP StorageWorks Scalable File Share System Installation and Upgrade Guide Version 2.2

System configuration worksheets B–1
BWorksheets
Use the worksheets in this section to record your system configuration information.
B.1 System configuration worksheets
Use the worksheet in Table B-1 to record the system information you gather in Section 2.3.
Use the worksheet in Table B-2 to record the Gigabit Ethernet network information you gather in
Section 2.4.2.
Use the worksheet in Table B-3 to record the Voltaire InfiniBand interconnect information you gather in
Section 2.4.3. If the Voltaire InfiniBand interconnect is partitioned, enter the details of each
IB interface to be configured (one for each partition where the HP SFS system will be used).
Table B-1 System information worksheet
Parameter Value
System name
DNS domain name
Number of servers in the system
Number of the administration server (first server
1
)
1. The names of servers are made up of the system name and the server number, and server numbering usually starts
at 1 (although it is possible to start at another number if you wish).
Timezone
Table B-2 Gigabit Ethernet network information worksheet
Parameter Gigabit Ethernet Network 1 Gigabit Ethernet Network 2 Gigabit Ethernet Network 3
NIC (Device) attached to
the network
Type of network
Start IP address
Netmask
Maximum MTU of the
interface (default is 1500)
Static Routes
Alias IP
Configure on all servers
(Yes/No)
Table B-3 Voltaire InfiniBand interconnect information worksheet
IB Interface name Start IP address Netmask Maximum MTU of
the interface (default
is 1500)
Pkey