HP StorageWorks Scalable File Share System Installation and Upgrade Guide Version 2.2
Step 4: Configuring the system parameters 7–7
If the system software has previously been installed, either at the factory or on site, the following menu
is displayed:
.
.
.
1) Install new system (create new adm LUN)
2) Upgrade or repair system (use existing adm LUN)
c) Cancel
Enter 1 to select the option to install a new system.
NOTE: If you want to upgrade an existing system, use the instructions in Chapter 8.
4. You are now asked to enter the timezone, date, and time. If you wish, you can accept the default
timezone at this point and change it later. When you have finished installing the administration
server, you can identify the valid timezones by listing the contents of the /usr/share/zoneinfo/
posix directory on the server; this directory and its subdirectories contain a file for each valid
timezone.
For example, the following are some of the timezone files:
• EST5EDT (Eastern Standard Time)
• CST6CDT (Central Standard Time)
• MST7MDT (Mountain Standard Time)
• PST8PDT (Pacific Standard Time)
NOTE: Some timezones do not support Daylight Savings Time. Be careful to choose the
appropriate timezone.
When entering the timezone, date, and time, you can press the Return key to accept the default, as
shown in the following example. If the defaults are not correct, enter the correct information:
Please enter your timezone [GMT]: EST5EDT
Please enter the current date (dd/mm/yyyy) [16/12/2005]:
Please enter the current time (hh:mm:ss) [15:49:58]:
Starting the MySQL server
Creating database hplsdb
Creating database tables
5. A list of the menus that allow you to enter the system information is displayed, as follows. These menus
are described later in this chapter:
This menu allows you to specify or update configuration data. If
you are not happy with any of the data you have entered, you may
reenter it again. Your changes do not take affect until you exit.
If you choose to quit, all changes you have made are discarded.
At any stage you can enter ? to get more help on the topic.
To update data select one or all of the following sections:
1) System
2) Configure Networks
3) Network Services
4) Management Network
5) iLO Access
6) Storage
a) All of the above
e) Exit (save updates)
q) Quit (discard updates)
Enter your choice [a]: