HP StorageWorks Scalable File Share System Installation and Upgrade Guide Version 2.2

Configuring EVA4000 storage 5–15
To connect to the Microsoft Windows server, perform the following steps:
1. Start a Web browser and enter the IP address of the Microsoft Windows server where Command
View EVA is installed, for example:
http://16.123.123.30
A Web interface to the server is displayed. Figure 5-1 shows the interface.
Figure 5-1 Storage management Web interface
2. Click the Devices link, and then click the Command View EVA link. You will now be able to see
the EVA4000 arrays listed in the Navigation pane on the left of the window.
Figure 5-2 shows the Initialized Storage System Properties page.
Figure 5-2 Initialized Storage System Properties page
To view or manage a component in the storage system, select the icon for the component. The
properties of the component are displayed in the Content pane on the right of the window.
Proceed to Section 5.2.5.2 to record the WWIDs of the EVA4000 arrays.