HP StorageWorks Scalable File Share Release Notes - Version 2.3

New and changed features in HP SFS Version 2.31–40
1.8.3.14 Section 5.1.1 Supported configurations for NFS servers and client systems
Replace Table 5-1 (HP SFS client node qualified for use as NFS server) with the following:
Remove the following note:
NOTE: You cannot configure a system that is running a Version 2.6 kernel as an NFS server.
Replace Table 5-2 (NFS client systems tested with the qualified NFS server) with the following table:
1.8.3.15 Section 5.1.2 Configuration factors for NFS servers
Remove these two bullets:
• The NFS server must be running a Linux 2.4 based kernel with the HP SFS client software installed.
Using a Linux 2.6.x kernel on the NFS server is not supported in this release.
• If the NFS server is configured to access the Lustre file system via an InfiniBand? interconnect, the
Voltaire InfiniBand? Version 3.4.5 interconnect driver must be used, because it is compatible with
Linux 2.4.x kernels.
1.8.3.16 Section 5.1.3 Configuration factors for multiple NFS servers
Third and fourth bullets:
Distribution Kernel Version
Red Hat Enterprise Linux 4 Update 5 2.6.9-55
Red Hat Enterprise Linux 4 Update 6 2.6.9-67
Distribution Platform SFS Interconnect
Red Hat EL4 U6 x86_64, i686 GigE
Red Hat EL4 U5 x86_64, i686 OFED Infiniband
Red Hat EL4 U4 x86_64, i686 GigE
Red Hat EL4 U3 x86_64 OFED Infiniband
Red Hat EL4 U7 x86_64 GigE
SLES 9 SP3 x86_64 GigE
SLES10 SP1 x86_64, i686 GigE
HP-UX 11i v2 ia64 GigE
Solaris 10 x86_64 GigE
Fedora 7 x86_64 GigE
SimplyMEPIS 6.5 x86_64 GigE
FreeBSD 6.2 x86_64 GigE
Ubuntu 7.04 x86_64 GigE
OpenSUSE 10.2 x86_64 GigE
Debian 4 x86_64 GigE
Scientific Linux SL5.0 x86_64 GigE