HP StorageWorks Scalable File Share for SFS20 Enclosure Hardware Installation Guide Version 2.2

Figure 7-7 HP ProLiant DL380 G5 Front LEDs
F A
P
I
O V
P O
P
P W
S P
1 2 3
6
5
4
1 2
3
Table 7-6 HP ProLiant DL380 G5 Front Panel LEDs
StatusDescriptionItem
Blue = ActivatedUID LED button1
Flashing = System being remotely managed
Off = Deactivated
Green = NormalInternal health LED2
Amber = System degraded. To identify component in
degraded state, refer to Section 7.2.4 Systems Insight Display
LEDs
Red = System critical. To identify component in critical state,
refer to Section 7.2.4 Systems Insight Display LEDs
Green = NormalExternal health LED (power supply)3
Amber = Power redundancy failure. To identify component
in degraded state, refer to Section 7.2.4Systems Insight
Display LEDs
Red = Critical power supply failure. To identify component
in critical state, refer to Section 7.2.4Systems Insight Display
LEDs
Green = Network linkNIC 1 link/activity LED4
Flashing = Network link and activity
Off = No link to network. If power is off, view the rear panel
RJ-45 LEDs for status.
Green = Network linkNIC 2 link/activity LED5
Flashing = Network link and activity
Off = No link to network. If power is off, view the rear panel
RJ-45 LEDs for status.
Green = System onPower On/Standby button/system
power LED
6
Amber = System shut down, but power still applied
Off = Power cord not attached or power supply failure
7.2.2 ProLiant DL380 G4 Front Panel LEDs
The front panel of the DL380 G4 server has six LEDs. Figure 7-8 “ProLiant DL380 Front Panel
LEDs” shows these LEDs. They are described in Table 7-7 “ProLiant DL380 Front Panel LEDs”.
7.2 HP ProLiant DL380 LEDs 85